Categories

ImmersionRC Vortex 250 PRO FPV Racing Drone w/ Taranis 9XD Plus Radio, FatShark Dominator HD2 FPV Goggles (RTF)

ImmersionRC Vortex 250 PRO FPV Racing Drone w/ Taranis 9XD Plus Radio, FatShark Dominator HD2 FPV Goggles (RTF)
Product Code: drone-combo-vortex-2
Availability: Ship From Warehouse 1-3 Days
Price: R25,999.0 R23,999.0
Ex Tax: R21,051.8
Qty:     - OR -   Add to Wish List
Add to Compare

1x ImmersionRC Vortex 250 PRO FPV Racing Drone (350mW)

1x FrSky Taranis X9D Plus Radio (Mode 2) w/ EVA Case

1x FrSky D4R-II-CPPM Receiver

1x FatShark Dominator HD2 FPV Goggles

1x FatShark 32 Ch 5.8G Race Band Receiver Module

1x ImmersionRC SpiroNet 5.8GHz RHCP Antenna (2 Antennas)

1x SKYRC IMAX B6AC V2 Professional Balance Charger / Discharger

1x FatShark Banana Discharge Cable

1x Tattu 1300 mAh 3S 45-90C LiPo Battery

 

 

 

DESCRIPTION

PURE-BRED RACER

The Vortex 285’s foldable tubular arms are replaced with virtually unbreakable 4mm Carbon Fiber flat arms, with twelve M3 aluminium spacers wrapped in custom plastic.
The frame is designed to hit objects which don’t like to move out of the way, and survive to fly again in the next race.
The 2mm Carbon Fiber top-plate is designed to take some serious abuse, backed up by 2mm FR4 skid plates which survive scraping across the occasional parking-lot floor.

FUSION GEN2 FLIGHT CONTROLLER

The ImmersionRC Fusion, a highly integrated state-of-the-art flight controller, gets an extensive update for the Vortex 250.
The ‘F1’ class processor is updated to an F3, flash memory for BlackBox log storage is integrated, the buzzer is replaced with one MUCH louder, and a port is added for direct serial receiver hookup (5V and 3.3v supply options).
As for the Fusion Gen1, the Gen2 is pre-loaded with a custom build of CleanFlight, and is future-proof, supporting future updates.
The high performance ‘F3’ processor provides > 2x the performance of it’s predecessor, allowing lower loop times, and better flight performance.
PIDs are adjusted on-screen, in easy-to-use menus, driven directly from the R/C Tx.

INTEGRATED 5.8GHZ VIDEO TX WITH RACEBAND

An on-board NexWaveRF 5.8GHz video transmitter, with 40 channel support, ensures compatibility with any 5.8Ghz A/V Rx on the market.
New for the Vortex 250, is Dynamic Power Control. Transmitter power is lowered automatically when the quad is disarmed, or ready for a race to start, to reduce interference to other pilots.
ImmersionRC’s exclusive RaceBand allows 8 pilots to fly together, while being 100% legal for US resellers to distribute. All channels fall within the legal US Ham band.
The on-board OSD allows video transmitter channels to be chosen using the R/C transmitter, no more dip-switches to flip, and no more frequency lists to remember.
Full compatibility with all ImmersionRC/FatShark, Boscam, Team Black-Sheep, DJI, and ImmersionRC RaceBand channels.

FLEXIBLE CAMERA OPTIONS

The flexible Vortex camera mount supports both a flight cam, and an HD camera such as a GoPro. This mount is included in the box with the Vortex 250, and doesn’t require the purchase of an add-on product.
The flight cam is protected from impacts, and is suspended from a vibration-dampened carbon-fibre plate. An adjustable bracket allows the camera to be tilted to ensure a good forward view during high-speed racing.
As the icing on the cake, a monster 3A switching regulator allows any HD cam (GoPro included) to be powered from the flight pack, allowing unnecessary camera batteries to be left at home.

PRO-TUNER, IN THE BOX

The Vortex 250 continues in the footsteps of it’s Vortex 285 big-brother, and not only ships with a pro-tune that flies like it is on rails, but adds a selection of pro-tunes created by some of the experts in the hobby.
Some of the biggest names in FPV Quad Racing have abused countless LiPos tuning the Vortex for peak performance, and have produced some stunning videos in the process.

LIGHTS!, MUSIC!, ACTION

Ok, there is no music, we’ll leave that to the post-processing, but there are lights, and plenty of action!
A set of 8 24-bit RGB LEDs sit on the tail of the Vortex, sandwiched safely between the upper, and lower frame plates.
These LEDs, controlled by a dedicated 32-bit ARM processor (yeah… what were we thinking!), can show something as mundane as the pilot’s favourite color, just about anything else we decide to roll into the user-upgradable firmware.
Brake lights?, Shift to white for max. acceleration?, Indicators for polite left/right turns?, or just a pattern to remind you of 80’s Discos.
Since Airgonay’s now-famous ‘Star Wars’ video, rear lights on miniquads have become not a ‘nice to have’, but a ‘no fun without ’em’.


‘GEN2’ CUSTOM 32-BIT, 20A ESCS, WITH ONESHOT125

Custom 20A ESCs (22A Peak), with OneShot125, and regenerative braking, for crisp-responsive flight using CleanFlight. A 32-bit ARM processor runs each ESC, ensuring plenty of processing power to drive even the most fussy brushless motors.
The second generation of ImmersionRC’s ‘EzESC’, with race-proven reliability, and the extra punch required to spin the 2204/2300kV motors.
These ESCs also support our innovative rotorSENSE, which programs prop direction with the flick of a finger. No more swapping motor wires.

BLACKBOX RECORDER

Blackbox is a high speed recorder for flight controller data, which is stored in an integrated flash memory on the Vortex 250’s Fusion Gen2 board.
This extremely powerful tool can be used to tweak your PIDs to perfection with your choise of props, battery, and camera.


FULL GRAPHIC OSD, WITH EZOSD PEDIGREE

An on-board full-graphic OSD provides in-flight updates of critical parameters, and sports a menu which allows all options to be programmed in the field using the R/C Tx, and a set of goggles, or an LCD screen.
A real-time interface with the flight controller enables artificial horizons, F-18 style displays, and exchange of flight parameters.

SEVEN! 32-BIT ARM PROCESSORS

There are not many quads out there with that claim to fame… the Vortex 250, like its 285 big-brother, sports no less than seven 32-bit ARM processors, all working together for maximum fun-factor.
A dedicated ARM for the flight controller, another for the full-graphic OSD, even another for the LED board at the back of the quad, and then four high performance ARMs for the custom ESCs.

CUSTOM OSD LAYOUTS

Several OSD layouts are included in the package:

  • A classical EzOSD-type layout, with all critical parameters available on-screen.
  • A Heads-Up display which would be more at home in a fighter-jet, with artificial horizon and altitude indicator.
  • A Race layout, with just the critical parameters, tucked around the edges of the display.
  • A Gaming layout… we’ll explain that one just before launch

All OSD layouts include screen-center alerts for critical warnings, such as battery voltage, EzUHF Link Critical, etc.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By RCHOBBY
RC Hobby SA (Pty)Ltd © 2017